Nice Wiring Two Lights From One Source
This diagram shows the additional cable connected to an existing ceiling rose.
Wiring two lights from one source. The ground wire on the other hand must connect to both switches and the easiest way to do this is to make a pigtail as you did with the hot wires. Connect one wire to the first switch in the box and the second wire to the other switch and connect the black wire from each of the lights to the other terminal on its respective switch. One source is spliced to each switch with a pigtail to power the two lights.
Two three way switches control one light with the electric power coming through the light on a two wire cable. Connect the black wire from the switch to the black wire from the first light and the black wire coming from the second light. Then you will have to push the stripped sheathing into the box.
Here two switches are wired in the same box to control two separate lights. Taking sheathed cable strip about an inch or so and then run it from the switch to the fixture. The other way to wire multiple lights to one switch is to connect all of them directly to the switch in a home run configuration.
Run your cable from the first light to the second light. Connect the black wire from the power supply to the white wire of the cable connected to the switch. This video is about installing two leviton light switches on one power source.
The source is at the switch box and a 2 wire cable is run to each light. Pull one end of each cable through the back of one of the light fixture electrical boxes. Wrap a piece of black electrical tape around each end of this white wire to indicate that it is a hot wire rather than a neutral wire.
You can do this light switch wiring in one of two ways. Step 2 run the cable you will want to run a cable from the power source to the first light switch and then from the first switch to the second switch. The new cable here is labelled light 2.