Beautiful Work Navigation Anchor Light Switch

Your running lights also called navigation or nav lights are the red and green lights on the bow.

Navigation anchor light switch. While sitting at anchor in the dark only the white light should be on. These are often controlled with one switch because they have a very specific operation per the uscg. This allows the use of either 2 switches or a 3 position switch with one off position.

Get it as soon as fri aug 28. Switching left or right selects the required lighting configuration. Abyc standards state that one switch or position of a switch will turn on all of the navigation lights required for the vessel while underway.

Certified to ip66 these standard rocker switches offer complete protection against dust prolonged spray and high pressure wash resistant and are recognized to ul1500 ignition protection for marine products. When running actually moving at night all lights should be on red green and white. Nav anc lights blue stark 5 pin laser etched led rocker switch dual light 20a 12v on off.

Reversing the connections will illuminate the anchor light. This is commonly used to power a boat s navigation and anchor lights where both lights are required to be on at night when the boat is moving but only the anchor light is required when the boat is at anchor. A pre wired toggle switch is supplied with the combi light to facilitate the supply reversal.

Only 2 left in stock order soon. Another switch or position of a switch will turn on the anchor light. This article addresses the most common configurations for smaller vessels.

These switches are vibration shock thermoshock moisture and salt spray. The possible switch configurations for navigation lights vary greatly depending on the vessel size type and purpose. International navigation rules state that the boat navigation lights should be placed above the uppermost continuous deck.